Operating instructions

Connecting the Machine
22
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending e-mail with IEEE 1394 inter-
face cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication Port].
Reference
p.58 “Interface Settings”
p.68 “File Transfer”
Menu User Tool Setting Requirements
Interface Settings/IEEE 1394 IPv4 Address Neccessary
Interface Settings/IEEE 1394 DDNS Configuration As required
Interface Settings/IEEE 1394 Host Name As required
Interface Settings/IEEE 1394 Domain Name As required
Interface Settings/IEEE 1394 WINS Configuration As required
Interface Settings/IEEE 1394 IPv4 over 1394 Neccessary
Interface Settings/Network IPv4 Gateway Address Neccessary
Interface Settings/Network DNS Configuration As required
Interface Settings/Network Effective Protocol Neccessary
File Transfer SMTP Server Neccessary
File Transfer SMTP Authentication As required
File Transfer POP before SMTP As required
File Transfer Reception Protocol As required
File Transfer POP3 / IMAP4 Settings As required
File Transfer Administrator's E-mail Address As required
File Transfer E-mail Communication Port As required
File Transfer Program / Change / Delete E-mail
Message
As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required