Operating instructions

Settings You Can Change with the User Tools
75
5
❖
❖❖
❖ Wireless LAN Signal
Shows the radio-wave status of the access point connected in Infrastructure mode.
Radio wave status is shown when you press [Wireless LAN Signal].
❖
❖❖
❖ WEP (Encryption) Setting
Specifies encryption of the Wireless LAN. If this is set to effective, you must
enter the WEP key.
Note
❒ Default: Inactive
❖
❖❖
❖ Transmission Speed
Specifies the communication speed of the Wireless LAN.
Note
❒ Default: Auto
❖
❖❖
❖ Return to Defaults
You can return Wireless LAN settings to the factory default value.
File Transfer
Make these settings as required when using ScanRouter V2 Lite/Professional.
Note
❒ The optional ScanRouter V2 Professional is required for distributing received
fax documents.
❖
❖❖
❖ Delivery Option
If [ON] is selected, the delivery server IP address will be displayed.
Note
❒ Default: OFF
❒ The delivery server IP address can only be set from ScanRouter V2
Lite/Professional.
❖
❖❖
❖ Fax RX File Transmission
• Setting per Line
Specifies whether or not received fax documents should be sent to Scan-
Router V2 Professional for each of the fax lines.
Note
❒ Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do
not Deliver