Operating instructions

User Tools (System Settings)
68
5
Timer Setting
❖
❖❖
❖ Auto Off Timer
The machine turns off automatically to conserve energy after a specified
amount of time has passed following job completion. This function is called
"Auto Off".
The machine status after the Auto Off operation is called "Off mode" or "Sleep
mode". For the Auto Off Timer, specify the time to elapse before the Auto Off
function is activated.
The time can be set from 1 minute to 240 minutes using the number keys.
Note
❒ Default: 60 minutes
❒ When in “Off” or “Sleep mode”, the machine can be ready for use within
99 seconds.
❒ Auto off may not work when errors are displayed.
❖
❖❖
❖ Energy Saver Timer
Set the amount of time the machine waits before switching to lower-power
mode after copying has finished or the last operation is performed.
The time can be set from 1 minute to 240 minutes using the number keys.
Note
❒ Default: 15 minutes
❖
❖❖
❖ Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
Note
❒ The warm up time for making a copy from standby mode is 3 seconds for
Panel off Level 1 and 10 seconds for Panel off Level 2.
❒ Default: 60 seconds
❒ Enter a time interval between 10 seconds and 999 seconds using the
number keys.
❖
❖❖
❖ System Reset Timer
The System Reset setting is a setting that automatically switches to the screen
for the function set in Function Priority. This happens if no operations are per-
formed or when an interruputed job is cleared. This setting sets the system re-
set interval. ⇒ p.62 “Function Priority”
Note
❒ Default: 60 seconds
❒ The time can be set from 10 to 999 seconds by 1 second steps using the
number keys.