Operating instructions

User Tools (System Settings)

❖

❖❖

❖ Output: Document Server (Document server)

You can specify a tray to which documents are delivered.

Note

❒ Default: Internal Tray 1

❒ For details about output trays, refer to p.63 “Output: Copier (Copy

mode)”.

❖

❖❖

❖ Output: Facsimile (Facsimile)

You can specify a tray to which documents are delivered.

Note

❒ Default: Internal Tray 1

❒ For details about output trays, refer to p.63 “Output: Copier (Copy

mode)”.

❖

❖❖

❖ Output: Printer

You can specify a tray to which documents are delivered.

Note

❒ Default: Internal Tray 1

❒ The output trays set on the Printer Driver have priority over the output

tray specified above.

❒ For details about output trays, refer to the illustration in p.63 “Output:

Copier (Copy mode)”.

Output tray settings

Limitation

❒ You cannot interrupt the current stapling job even when a stapling job is spec-

ified with a different function.

❒ When the 500-Sheet Finisher or 1000-Sheet Finisher is installed and stapling

or shift-sorting is specified for a job, the job will be delivered to the Finisher

Shift Tray regardless of the output tray specified.

❒ The output tray used can be changed, when a stapling job of a different func-

tion is interrupted by copying, as in the following cases:

❖

❖❖

❖ When the 500-Sheet Finisher is installed and the finisher tray is specified for the

output tray:

• The interrupting job will be delivered to Internal Tray 1.

❖

❖❖

❖ When the 1000-Sheet Finisher is installed and the finisher tray is specified for the

output tray:

• The interrupting job will be delivered to Finisher Proof Tray.