Operating instructions

Basics

When using the Wireless LAN Interface (option) in Ad hoc Mode

Note

❒ You can set the Ad hoc Mode when you do not set SSID (Network Name)

from your computer. In this case, setting SSID from this machine is ineffec-

tual.

❒ The network administrator must check the environment and set the Com-

munication mode and Channel correctly. For details on settings, see "Us-

ing the IEEE 802.11b (Wireless LAN)" in the Network Printing Guide.

❒ You can set the Ad hoc mode from the control panel or using the Web

browser. For details on settings, see the Network Printing Guide.

A Make sure that [Network] is selected, and press [LAN Type].

B Press [IEEE 802.11b], and then press [OK].

C Press [IEEE 802.11b].

D Press [Communication Mode].

E Press [Ad hoc], and then press [OK].

F Press [Channel].

G Use the number keys to enter the channel to be used, and press [OK].