Operating instructions

Configuring the Network

Acquiring the IP Address from the DHCP Server

To use the DHCP server to acquire the IP address, select [DHCP] from [Network

Boot].

Note

❒ You need to make the settings when you use DHCP. See "Using DHCP" in

the Network Printing Guide.

❒ To always assign the same IP address to the machine, reserve the IP ad-

dress for the machine on the DHCP server. See "Using DHCP" in the Net-

work Printing Guide.

❒ Use the default IP address.

A Make sure that [Network] is selected, and then press [Network Boot].

B Press [DHCP] and then press [OK].

When using NetWare

To use the machine on NetWare, be sure to select the type of [NW Frame Type].

You can select the following frame types:

• Auto select (Default)

• Ethernet II

• Ethernet 802.2

• Ethernet 802.3

• Ethernet SNAP

Note

❒ Select a file server and a frame type with the same connection.

❒ When you select Auto select, the frame type detected upon startup is auto-

matically set. Therefore, your desired frame type may not be selected by

the system, which supports multiple frame types. Select the desired frame

type.

❒ To use the machine in a pure IP environment on NetWare 5/5.1, select [Ef-

fective] for TCP/IP in step