Operating instructions

Basics
18
2
Connecting the Network Cable to the Network
Limitation
❒ The IEEE 1394 Board (option) and the Wireless LAN Board (option) cannot be
installed at the same time.
Note
❒ Connect the machine to the computer. Set the network connection settings,
then install any necessary software such as the printer driver. For details, see
the Printer Reference.
Connecting to the Ethernet Interface
A
AA
A
Turn off the main power switch.
B
BB
B
Loop the cable approximately 5 cm (2") and 35 cm (14") from the machine
end connector.
House the loops using the supplied cores.
1. About 5 cm (2") 2. About 35 cm (14")
C
CC
C
Attach the Ethernet interface cable to the jack on the board.
ZGJS112E
ZGJS832E