Operating instructions

REMARKS
128
7
Maintaining Your Machine
If the exposure glass, exposure glass
cover, or document feeder belt is
dirty, you might not be able to make
clean copies. Clean these parts when
you find them dirty.
❖
❖❖
❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then, wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvents, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified in this manual. Other
parts should be cleaned by your
service representative.
Cleaning the Exposure Glass
Clean 1 and 2.
Cleaning the Exposure Glass
Cover
Cleaning the Document
Feeder
Clean 1 and 2.
ZGGH420E
ZGJS826E