Operating instructions

Changing the Paper Size in Tray 2 and 3

The following explains the procedure for changing a paper size in Tray2 and 3.

• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side fence

may slip out of place.

• Check the top of the paper is aligned to the right side.

• Do not stack paper over the limit mark.

1. Check that paper in the paper tray is not in use for printing, and then pull the tray carefully

out until it stops.

ANS058S

2. Remove paper if loaded.

3. Release the lock on the side fence.

ANS023S

4. While pressing down the release lever, slide the side fence until they are aligned the paper

size you want to load.

Loading Paper