Operating instructions

2. Press the [ ] or [ ] key to select [Host Interface], and then press the [ Enter] key.

3. Press the [ ] or [ ] key to select [IEEE 802.11b], and then press the [ Enter] key.

4. Press the [ ] or [ ] key to select [Comm. Mode], and then press the [ Enter] key.

5. Press the [ ] or [ ] key to select the transmission mode of IEEE 802.11b, and then press the

[ Enter] key.

• The factory default is [802.11 Ad hoc].

• To use an IEEE 802.11b card for which the SSID (Network Name) setting is not necessary, select

[Ad hoc].

• The transmission mode of IEEE 802.11b can also be set using a Web browser. For details, see

Web browser, and "Configuring the Network Interface Board Using Web Browser", Software

Guide.

6. If [802.11 Ad hoc] or [Ad hoc] is selected for [Comm. Mode], set the channel to use for

transmission.

Consult your network administrator for the channel to use.

7. Press the [ ] or [ ] key to select [Channel], and then press the [ Enter] key.

8. Press the [ ] or [ ] key to select the channel, and then press the [ Enter] key.

9. Set [Trans. Speed] in the same way.

4. Configuration