Operating instructions

• For details about printing the configuration page, see p.33 "Test Printing".

Making Network Settings for Using Netware

If you use NetWare, select the frame type for NetWare.

Select one of the items below if necessary.

• Auto Select

• Ethernet II

• Ethernet 802.2

• Ethernet 802.3

• Ethernet SNAP

• Usually, use the default setting ("Auto Select"). When you first select "Auto Select", the frame type

detected by the printer is adopted. If your network can use more than two frame types, the printer

may fail to select the correct frame type if "Auto Select" is selected. In this case, select the appropriate

frame type.

1. Press the [Menu] key.

AST008S

The menu appears on the display.

2. Press the [ ] or [ ] key to select [Host Interface], and then press the [ Enter] key.

3. Press the [ ] or [ ] key to select [Network Setup], and then press the [ Enter] key.

Ethernet Configuration