Operating instructions

AST008S
The menu appears on the display.
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [ Enter] key.
3. Press the [ ] or [ ] key to select [Network Setup], and then press the [ Enter] key.
4. Press the [ ] or [ ] key to select [IPv4 Settings], and then press the [ Enter] key.
5. Press the [ ] or [ ] key to select [DHCP], and then press the [ Enter] key.
6. Press the [ ] or [ ] key to select [On] or [Off], and then press the [ Enter] key.
The address will be detected by the printer.
The default setting is [On].
7. Press the [Menu] key to return to the initial screen.
8. Print a configuration page to confirm the settings made.
4. Configuration
42
4