Operating instructions

8. If you use IPv4, assign the IPv4 address to the printer. Press the [ ] or [ ] key to select [IPv4

Settings], and then press the [ Enter] key.

To get the IP address for the printer, contact your network administrator.

9. To specify the IP Address, press the [ ] or [ ] key to select [IPv4 Address], and then press

the [ Enter] key.

If you use IPv4, also assign Subnet Mask and Gateway Address.

10. Press the [ ] or [ ] key to enter the address, and then press the [ Enter] key.

After completing to enter in the all fields, press the [ Enter] key. Use this method to assign the subnet

mask and gateway address.

Do not set "011.022.033.044" as the IP address.

11. Press the [Menu] key to return to the initial screen.

12. Print a configuration page to confirm the settings made.

• For details about printing the configuration page, see p.33 "Test Printing".

Using DHCP - Detecting the Network Address Automatically

• When you use this printer in DHCP environment, select [DHCP] following this procedure.

• When [DHCP] is selected, you cannot make settings for the IP address and gateway address

• Consult your network administrator for information about making network settings.

1. Press the [Menu] key.

Ethernet Configuration