Operating instructions

4. Configuration

Ethernet Configuration

Make the following network settings according to the network interface you are using. You can use Smart-

DeviceMonitor for Admin or a Web browser to make IP address-related settings in a TCP/IP-capable

environment.

The following table shows the control panel settings and their default values. These items appear in the

[Host Interface] menu.

Setting Name Value

IPv4 Settings

• DHCP: On

• IPv4 Address: 011.022.033.044

• Subnet Mask: 000.000.000.000

• Gateway Address: 000.000.000.000

IPv6 Settings Stateless sett.: Active

Frame Type (NW) Auto Select

Active Protocol

• IPv4: Active

• IPv6: Not Active

• NetWare: Active

• SMB: Active

• AppleTalk: Active

Ethernet Speed Auto Select

LAN Type Ethernet

• Configure the printer for the network using the control panel.

• If DHCP is in use, the IP address, subnet mask, and gateway address are all set automatically.

• Make this setting only when it is necessary. See Software Guide.

1. Press the [Menu] key.