Operating instructions

10. Removing Misfed Paper

Removing Misfed Paper

An error message appears if a paper misfeed occurs. The error message gives the location of the misfeed.

Check the location of the paper misfeed, and remove the misfed paper.

• The inside of the machine could be very hot. Do not touch any parts other than specified in this

document when removing misfed paper. Otherwise, it may cause burn injury.

• The fusing section of this machine might be very hot. Caution should be taken when removing misfed

paper.

• Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple

unit. You can trap your fingers if you do not.

• Misfed paper may be covered in toner. Be careful not to get toner on your hands or clothes.

• Toner on prints made after removing misfed paper may be loose (inadequately fused). Make a few

test prints until smudges no longer appear.

• Do not forcefully remove misfed paper, as it will tear. Torn pieces remaining inside the printer will

cause further misfeeds and possibly damage the printer.

Remove Misfeed A, U: Internal

A paper jam has occurred in one of the paper trays or the large capacity tray (LCT. optional).

AST020S

1. Open the front cover.

127