Unit installation

Product Support Guide
D009 D011 D012 D013
Ver.1.5 Page 7 of 37 4/8/2008
Subject to change without notice
MFP Options
MFP Option Board Slot / SD Card Assignments
*1 There is only one board slot (S1) on the controller of the machine. Only one of these options can be installed at one time.
*2 Two SD card slots are available. If more than two options need to be installed, the applications can be moved to one SD card with SP5873-1.
Due to copyright restrictions, the PostScript Unit (D383) cannot be moved to another SD card. However, other applications can be moved
to the PostScript3 SD card. (For more information, see the Printer/Scanner Option manual.)
It is recommended to keep Slot C2 open for firmware updates.
OPTION SLOT Notes
Printer Scanner
Unit *2
C1
See note 2
RPCS Printer
Unit *2
C1
See note 2
Printer Enhance
Unit *2
C1
Must be merged with RPCS Printer Option. See
Note 2
Scanner Enhance
Unit *2
C1
Must be merged with Printer Enhance Option. See Note
2
PostScript3
Option *2
C1
If other options are installed in Slot C1, they must be
merged onto the Postscript 3 card. See note 2.
Data Overwrite
Security *2
C1
See note 2
HDD Encryption C2
SD Card is removed after installation
VM Card C2
VM card should not be merged.
IEEE 80211a/g *1 S1
Only one option can be installed in slot S1. Note 1
Bluetooth *1 S1
Only one option can be installed in slot S1. Note 1
File Format
Converter *1
S1
Only one option can be installed in slot S1. Note 1
Gigabit Ethernet *1 S1
Only one option can be installed in slot S1. Note 1
USB Printing U1
Standard (must have printer option)
USB Host U2
Ethernet L1