Specifications

CRP-C0239-01
6
Printer Engine.
The scanned image data can be stored in D-BOX as Document Data (except for the
Scanner Function).
1.2.4.2 Printer Function
The Printer Function is used to receive the print data from a client PC via Network
Unit or USB Port sent from a client PC and to print out the data using Direct Print
Function or Store and Print Function.
Direct Print Function simply prints out the received print data using Printer Engine.
Store and Print Function stores (does not print out immediately) the print data in
D-BOX as Document Data (except for the Scanner Function). The actual print out is
performed using "1.2.4.8 Document Server Function (Management)", which is
described later.
1.2.4.3 Fax Function (Reception)
The Fax Function (Reception) is used to receive fax data from Fax Unit and either
print or store the fax data.
When printing the fax data, it simply prints out the received fax data using Printer
Engine.
When storing the fax data, it converts the received fax data into the Fax Reception
Data and then stores it in D-BOX (does not print out immediately). The actual print
out is performed using "1.2.4.8 Document Server Function (Management)", which is
described later.
*Note: The received fax data by the TOE is not intended for the target of this
certification. (Refer to "4.2.1 Notes for Protected Assets")
1.2.4.4 Fax Function (Immediate Transmission/Memory Transmission)
The Fax Function (Immediate Transmission/Memory Transmission) is used to scan the
original as image data using Scanner Engine and send the image data from Fax Unit
using Immediate Transmission or Memory Transmission.
Immediate Transmission sends the generated image data to the destination fax
sequentially while scanning the original, after connecting to the destination fax.
Memory Transmission scans the original before connecting to the destination fax. After
scanning the original, it connects to the destination fax and sends the image data.
1.2.4.5 Fax Function (Stored Documents Fax Transmission)
The Fax Function (Stored Documents Fax Transmission) is used to send "the specified
Document Data stored in D-BOX" from Fax Unit.
1.2.4.6 Fax Function (Fax Transmission from PC)
The Fax Function (Fax Transmission from PC) is used to receive print data from the
client PC via Network Unit or USB Port, and send the print data from Fax Unit.
1.2.4.7 Document Server Function (Scan)
The Document Server Function (Scan) is used to scan the original using Scanner
Engine as image data, and store the scanned data in D-BOX as Document Data (except
for the Scanner Function).