Installation guide

Page 4
Scanning
Command
WorkStation
Command
WorkStation LE
DocBuilder Pro
stop using the Job Monitor.
Do not resize the Job Monitor Window. If you resize the window, you may have unexpected
error that depend on your PC environment.
Job Monitor does not support direct queue connection.
Job Monitor does not provide status for jobs sent via a server.
NetWare
Regarding the Netware Setting of the Driver Properties, it will not work if you set Form
Feed, Enable Banner, and Notify.
In the Print Properties dialog box > NetWare Settings tab > Enable banner, only the text for
“1st banner name” is printed on the banner page. The text on “2nd banner name” is
disregarded. Regarding the Netware Setting of the Driver Properties, it will not work when
you set 2nd Banner.
If you select the Notify check box on the NetWare Settings tab, no notification is ever sent to
the computer.
Scan image area
When you print a scanned image directly, the copier may prompt you to use Custom Size.
In this case, choose the paper size from the printer driver.
Depends on the original size and the scan resolution, the scanned image size will be slightly
changed.
Job Overrides
You can choose options for staple and punch settings, input tray, and output destination that
are not installed on the copier. No message alerts you to this incompatibility.
You cannot change some properties such as Binding Margin, Imposition, Imposition Reducing,
Creep, and Center Margin. Make these settings from the printer driver when you send the job
to the EB-105EX. Also, you cannot change the Notes in the Owner
Information section.
Printing from the Windows 2000/XP RAW port
If you print from Windows 2000/XP in Command WorkStation using the RAW port, the
Document Name will not be displayed correctly.
Job Properties
In Job Properties, you may not be able to set options using the Finishing image or Shortcuts
Installing the dongle
When installing the dongle on a user computer to enable DocBuilder Pro, make sure the
dongle is connected directly to the parallel port. If dongles for other software are present, the
DocBuilder Pro dongle must be first; that is, closest to the parallel port connector on the
EB-105EX.
Document Server
Files created with DocBuilder Pro cannot be saved in the Document Server. The Document
Server feature does not support jobs created with DocBuilder Pro.