Installation guide

Page 3
The location is Tools¥w2k_xp_Server¥UMPD¥EFIPnPPatch.exe.
When you install a driver on Microsoft Point-and-Print, you cannot use the Two-Way
Communication function on your client computer. Set Two-Way communication using the
driver installed on your client computer.
When you install a driver onto a PC in order to share the driver with other client PCs
(Microsoft Point-and-Print), you may be required to insert the OS CD-ROM. If this happens,
just ignore the message and proceed to the next step (select OK, then browse the driver's "inf"
file).
Custom page sizes from PCL printer drivers
You cannot print custom page sizes in the LEF direction from the PCL printer drivers.
Redefine the custom page size to use the SEF direction.
Duplicate paper size names in Windows printer drivers
The following paper sizes are duplicated in the printer drivers for Windows NT 4.0,
Windows 2000, and Windows XP: A5, A4, A3, Executive, Statement, Legal, Tabloid, and
Letter.
Win98/Me with PS Driver
When printing a job on Windows 98/ ME, wait for the printing data to be cleared from the
spooler before sending the next Job.
Setting Paper Source on Windows NT 4.0 computers
When you print with a standard page size, use the Fiery Printing tab, not the Page
Setup>Advanced tab. For custom page sizes, however, do use the Page Setup>Advanced tab.
Server Comments
If nothing is entered in "Server comments" for the EB-105EX, "Samba 2.2.2" will
be displayed in the comment field when viewing the properties of the EB-105EX in
the network neighborhood browser or search computer browser. "Samba 2.2.2" is
the default setting.
EFI Job Monitor
The “Received at” and “Printed at” columns may display the wrong time. If the workstation is
set to a different time zone than the print server, then the display of the timestamp on the
Job Monitor will be different. This is expected behavior, but it is possible that a client
computer could reside in a different time zone from the server. If the client computer’s time
zone is different from the servers, and if the workstation time is then adjusted to show the
same time as the server, then the Job Monitor may show unusual results.
If you start Job Monitor before the EB-105EX is up, you cannot connect to the EB-105EX.
If this occurs, wait a minute after the EB-105EX reaches Idle. For Windows 98/Me computers,
if you still cannot connect, restart Job Monitor.
The Toner Level always displays that there is 100% toner. The toner indication is only 0% or
100%.
On Windows NT 4.0 and Windows 2000/XP, if you select “Run at Windows startup” for the
Job Monitor, it will not start up automatically.
When the graphics card in your Windows 9x/Me computer is not compatible with the Job
Monitor, the Job Monitor may not work properly. Try to renew to the latest graphics card or