Installation guide

ManualsBrandsRicoh ManualsComputer equipment411402 - EFI Fiery EB-105EX Controller

Release Notes

Printer Controller EB-105EX, version 1.01

System

Printing

This document contains information about Printer Controller EB-105EX version 1.01.

Before using the Printer Controller EB-105EX with version 1.01, make a copy of these

Release Notes and distribute them to all users.

OTE

This document uses the term “EB-105EX” to refer to the

Printer Controller EB-105EX.

Before printing to the EB-105EX:

• Make sure system software version version 1.01 is installed on the EB-105EX.

• Install user software version 1.0.0 onto client computers. For instructions, see the User

Software Installation Guide

Finisher

When the Finisher has no more staples, the appropriate indicator light does not turn red.

However, the copier panel does indicate that staples are needed. After you replenish the staple

supply, printing resumes.

Shutting down the EB-105EX

After you shut down the EB-105EX, the EB-105EX LCD continues to display “Shutdown in

progress.” Wait 30 seconds, and then shut off the copier.

Reboot System

If you reboot the system while the EB-105EX is printing, you may experience unexpected

results. Wait until the display reads Idle before rebooting.

Error Status

When the Status Indicator turns red and no error message is shown on the copier operation

panel of the Touch Panel screen, confirm the error status by pressing the [Fiery Menu] button

and then the [Menu/Cancel] button.

When the tray runs out of paper during a print job, it will be displayed on the main unit

operation panel as follows:

SEF (Short-Edge Feed direction) paper: "Load xxx SEF Paper in Tray #"

LEF (Long-Edge Feed direction) paper: "Load xxx Paper in Tray #" ("LEF" will not be

indicated)

Imposition

If you specify Mixed Media for Imposition jobs such as Booklet, Perfect, Double Print, and

Speed Print, you may experience unexpected printing results.

Imposition print jobs may not be stapled or punched correctly.

Imposition and Booklet Stapling can be set separately. If you want the document that is

imposed on the application to be booklet stapled, select only Booklet Staple from the Staple

print option.

Imposition Printing with

-up layout

Imposition Printing is not supported with N-up layout printing.

Summary of content (7 pages)

PAGE 1
Release Notes Printer Controller EB-105EX, version 1.01 This document contains information about Printer Controller EB-105EX version 1.01. Before using the Printer Controller EB-105EX with version 1.01, make a copy of these Release Notes and distribute them to all users. NOTE: This document uses the term “EB-105EX” to refer to the Printer Controller EB-105EX. Before printing to the EB-105EX: • Make sure system software version version 1.01 is installed on the EB-105EX. • Install user software version 1.0.
PAGE 2
Page 2 Printing during Power Cut mode If you send a Document Server and normal job to the EB-105EX while the copier is in Power Cut mode, the job status is incorrect after the copier exits Power Cut mode. If you send or print a job while the copier is in Power Cut mode, the status indicators on the LCD panel and in the Network Utility may not be updated. After the job is printed, the status indicators are properly updated.
PAGE 3
Page 3 The location is Tools¥w2k_xp_Server¥UMPD¥EFIPnPPatch.exe. When you install a driver on Microsoft Point-and-Print, you cannot use the Two-Way Communication function on your client computer. Set Two-Way communication using the driver installed on your client computer. When you install a driver onto a PC in order to share the driver with other client PCs (Microsoft Point-and-Print), you may be required to insert the OS CD-ROM.
PAGE 4
Page 4 stop using the Job Monitor. Do not resize the Job Monitor Window. If you resize the window, you may have unexpected error that depend on your PC environment. Job Monitor does not support direct queue connection. Job Monitor does not provide status for jobs sent via a server. NetWare Regarding the Netware Setting of the Driver Properties, it will not work if you set Form Feed, Enable Banner, and Notify.
PAGE 5
Page 5 Full Bleed printing jobs You cannot use DocBuilder Pro on Full Bleed printing jobs. FreeForm Job Previews On Windows 9x/Me, you cannot preview a FreeForm master. If you are using Windows NT, Windows 2000, or Windows XP, make sure to select the Two-Way Communication check box in the printer driver so that the EB-105EX can provide the preview information to the computer from which you are printing.
PAGE 6
Page 6 Default in PageMaker may cause unexpected printing results. To print a duplex job from PageMaker, select Duplex in the driver, not in the application. Adobe Acrobat 5 When you print a PDF with a large amount of embedded data (such as fonts and images) from a Windows NT 4.0 computer, some settings you specify for Mixed Media and Document Server are not recognized by the EB-105EX. In the case of document server jobs, security of the document may be rendered ineffective.
PAGE 7
Page 7 QuarkXPress Some functions in QuarkXPress do not function.