User's Manual

5
Sharing Images
113
Caution -------------------------------------------------------------------------------------------------------
• When the OS of the communication device is iOS, connect it to the camera using the Image Sync. For
details on the Image Sync, refer to “Operating the Camera with a Communication Device” (p.116).
• Note that when [On when power is on] is selected in Step 4, the camera emits radio waves even if
its power is off.
• Do not attempt to use the Bluetooth® function in a location where the use of Bluetooth® devices is
restricted or prohibited, such as on airplanes.
• When using the Bluetooth® function, observe local laws and regulations governing radio commu-
nication.
Memo ---------------------------------------------------------------------------------------------------------
• Once the pairing is established , the camera can be connected to the communication device via Blue-
tooth® only by the operations in Steps 1 to 4 from next time.
• Select [Paired Devices] on the screen in Step 6 to display the names of paired communication devices.
You can cancel the pairing by pressing h on this screen. The pairing can be established with up to
six communication devices.
• Select [Communication Info.] in Step 3 to display the camera’s [Device Name].
• When the pairing cannot be established from the camera, execute the pairing from the communica-
tion device.
• When [On anytime] is set in Step 4, you can set whether to transfer images while the power is off in
[Image Transfer while Off] of [Smartphone Link] in the E6 menu. (p.116)