Operating instructions

Default: [11]

Security Method

Select whether to enable encryption and specify the security type when the encryption is enabled.

WPA appears only when the optional Wireless LAN interface unit is installed.

Default: [Off]

• Off

• WEP

Press [Details], and then enter the WEP key using hexadecimal and ASCII characters.

• WPA

Press [Details], and then select the Encryption and Authentication Methods.

Select one of the following Encryption Methods:

TKIP, CCMP(AES)

Select one of the following Authentication Methods:

WPA-PSK, WPA, WPA2-PSK, WPA2

Wireless LAN Signal

You can check the signal strength when using Wireless LAN.

Restore Defaults

Reset the Wireless LAN to default.

USB Settings

Configure the communication parameters for computer-to-printer connection via USB.

USB Speed

Default: [Auto Select]

• Auto Select

• Full Speed

Fixed USB Port

Default: [Off]

• Level 1

• Level 2

• Off

• For details about how to configure the settings using Web Image Monitor, see p.135 "Using Web

Image Monitor" and Web Image Monitor Help.

4. Making Printer Settings Using the Control Panel

130