Operating instructions

Allocates more memory for image processing. Select this setting to increase print speed.
Depending on the document you are printing, this setting might not be effective.
Spool Printing
Specify whether or not to complete spooling before starting to print. Spooling stores a sent print job
temporarily in the printer, and then prints it. This function is available only if the hard disk is installed
on the printer.
Default: [Off]
• On
• Off
RAM Disk
If the hard disk is not installed for PDF Direct Print, select a value of 2 MB or higher. This function is
displayed only if no hard disk is installed. For details about the optional SDRAM module, see
Hardware Guide.
Default: [4 MB]
• 0 MB
• 2 MB
• 4 MB
• 8 MB
Auto E-mail Notify
Specify whether or not to send an error message to a preset e-mail address when an error occurs in
the printer. After changing the setting, turn off the power of the printer briefly, and then turn it on again.
For information, see Web Image Monitor Help.
Default: [On]
• On
• Off
Changing the System Menu
Follow the procedure below to change the settings for Auto Off.
4. Making Printer Settings Using the Control Panel
106
4