Operating instructions

• 5 minutes

• 15 minutes

• 30 minutes

• 60 minutes

• 120 minutes

Brightness Sensor Level

Specify the ambient light sensor's brightness sensitivity level (trigger threshold).

You can set the light sensor to one of five sensitivity thresholds. "Level 5 (Dim)" is the highest

sensitivity threshold. Selecting this level will cause the sensor to trigger at the smallest decrease

in ambient light.

Selecting a lower level will cause the sensor to trigger at progressively lower levels of ambient

light.

Default: [Level 3 (Dark)]

• Level 1 (Very Dark)

(equivalent to a moonlit night: approximately 0.4 lx)

• Level 2

• Level 3 (Dark)

(equivalent to a cinema during a screening: approximately 2.4 lx)

• Level 4

• Level 5 (Dim)

(equivalent to a building interior at sunset: approximately 75.0 lx)

Print Compressed Data

Specify whether or not to print compressed data. The supported compression format is GZIP.

Default: [Off]

• On

• Off

Memory Usage

Select memory to be used from Font Priority or Frame Priority.

Default: [Frame Priority]

• Font Priority

Allocates more memory to the PDL work area. Select this setting if printing fails due to insufficient

memory.

• Frame Priority

System Menu

105