Safety Valves Owner manual

Series KSE/F, KSE-C/F Page 4
9530-050-en Revision 04
TM 7489 Edition 03/2009
Body identification:
The shell bears the following information in
accordance with DIN EN 19 and AD 2000, A4:
 nominal diameter
 nominal pressure

shell material
 manufacturer's identification
 charge number/foundry identification
 Cast date
 arrow for direction of flow
1.2 Component identification
Certified safety valves KSE/F and KSE-C/F are
identified with a certification plate to the German data
sheet A2 (on pressure vessels). This stainless steel
plate is riveted to the valve body.
It contains the following details for example:
TÜV = TÜV symbol
SV = Safety valve
02 = Year of certification (here: 2002)
871 = Certification number (here: 871)
d
0
= Narrowest flow Ø in mm (here: 40)
D/G = intended for discharging vapours/gases
F = intended for discharging liquids

w
= Certified coefficient of discharge
(here: 0.82 for D/G and 0.55 for F)
p = Test pressure in bar (here: 6.0)
1.3 Tightening torques
All screws greased, tighten in diametrically
opposite sequence!
The tightening torques for pipe screws and body
screws mentioned must not be exceeded. For an
exception, see Section 8
flange connection valve /
pipe is leaking.
The following tightening torques are recommended:
Pipe screws
, flanges to ISO/DIN
Flange nom.
diameter
Screws Torque
[mm] [ISO/DIN] [Nm]
25 4 x M12 12
50 4 x M16 30
80 8 x M16 25
100 8 x M16 30
150 8 x M20 55
Pipe screws, flanges to ISO/DIN, drilled to ASME
Class 150
Flange nom.
diameter
Screws Torque Torque
[mm] [inch] [ASME] [Nm] [in-lbs]
25 1 4 x ½“ 12 106
50 2 4 x 5/8“ 25 221
80 3 8 x 5/8“ 40 354
100 4 8 x 5/8“ 30 266
150 6 8 x ¾“ 50 443
Screws body / inlet nozzle
Valve type Screws Torque Torque
[Nm] [in-lbs]
KSE/F 25/50 4 x M10 12 106
KSE/F 50/80 4 x M12 25 354
KSE/F, KSE-C/F
80/100
8 x M10
20 177
KSE/F, KSE-C/F
100/150
8 x M16
25 354
Hex. socket screws 914/1 of the bellows gasket
Valve type Screws Torque Torque
[Nm] [in-lbs]
KSE/F 25/50 4 x M8 10 89
KSE/F 50/80 4 x M8 12 106
KSE/F, KSE-C/F
80/100
4 x M8 12 106
KSE/F, KSE-C/F
100/150
8 x M8 10 89
1.4 Pressure/temperature diagram
Max. permissible pressure/temperature for the body.
When used in the minus temperature range,
the regulations applicable in the country in
question must be observed.