Manual

Series KNA/F, KNAP/F, KNA-D/F, KNAP-D/F, Page 14
KNA-S, KNAP-S, ASME
9520-080-en_USA Revision 10
TM 8361 Edition 10/2011
9.5 Conversion from lever to
actuator
 Select the actuator in accordance with the
instructions of the actuator manufacturer.
 Remove lever 203.
 Remove lever stop 577 and plug.
 Check the fits of the coupling 804, bracket 510
and actuator 850.
 Mount bracket 510 with the opening at right angles
to the direction of flow.
 Mount coupling 804 and actuator 850. Observe
the actuator position in accordance with the actua-
tor operating manual.
10 Drawings
10.1 Legend
101 main body
102 body end piece
200 ball
201 ball/stem unit
202 stem
203 lever
401 seat ring
403 packing bellows
405/1 thrust ring
502 spring gland follower
503 packing gland follower
510 bracket
526 retaining washer
(½“, ¾“, 1“, 1½“, 2", 3", 4")
550/1 disc
(6”, 8”)
554/1 washer
554/5 washer
(3")
557 grounding spring washer
577 lever stop
804 coupling
includes:
500 ring (Option)
952 pressure spring
980/1 round head grooved pin
850 actuator
901/x hex. screw
902/1 stud screw
904/1 set screw
914/2 hex. socket screw (only F07)
918/1 threaded rod
(6", 8")
920/x hex. nut
936/x toothed lock washer (not included)