Technical Specifications

Essential
RichmondWaterHeaters.com RICHMOND
®
WATER HEATERS
In keeping with its policy of continuous progress and product improvement, Richmond reserves the right to make changes without notice.
Richmond Water Heaters • 1115 Northmeadow Parkway, Suite 100, Roswell, Georgia 30076
© Rheem Manufacturing Company • 01/18 • FORM NO. T-640 Rev. 4
Essential
for
Manufactured Housing
30 and 40-Gallon Capacities
240 Volt AC/Single Phase
Electric
EFFICIENCY
• .92 - .93 UEF
• Isolated tank design reduces conductive
heat loss
• Dual 4500 watt heating elements for
faster recovery
PERFORMANCE
• FHR: Up to 53 gallons, based on model
• Recovery: 17 GPH for 3500 watts and 21
GPH for 4500 watts at a 90° F rise
LONGER LIFE
• Premium grade anode rod provides
long-lasting tank protection
FEATURES
• High performance and lower operating
cost
• Compliant with H.U.D., ASHRAE
90A-80 and NAECA requirements
• Single and double element models
available.Highefciencyresistored
heating element in single element
models
• Electric junction box located above
heating elements for easy installation
•
Over-temperature protector cuts off
power in excess temperature situations
• Automatic thermostat keeps water at
desired temperature
PLUS…
•Certiedformanufactured(HUD)and
modular construction
• Specially formulated glass lining
prevents corrosion and extends the
life of the tank
• EverKleen
™
selfcleaningdeviceghts
harmful sediment build-up with a
high- velocity spiraling water stream –
helpsoperatingefciencybysaving
energy, money and improving tank life
• Temperature and pressure relief valve
included
• Low lead compliant
WARRANTY
• 6-Year limited tank and parts warranty*
* SeeResidentialWarrantyCerticateforcomplete
information
Units meet or exceed ANSI requirements and have
been tested according to D.O.E. procedures. Units
meetorexceedtheenergyefciencyrequirementsof
NAECA, ASHRAE standard 90, ICC Code and all state
energyefciencyperformancecriteria.
LEED Point = 1
UniformEnergyFactorandratedgalloncapacitybasedonDepartmentofEnergy(DOE)requirements.
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specically requested.
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 3500 watt or 4500 watt heating elements.
• Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability.
C
A
B
RELIEF
VALVE
COLD
INLET
DOUBLE
ELEMENT
AVAILABLE
ON 30, 40
& 50 GAL.
ONLY
3"
HOT
OUTLET
WATER CONNECTIONS ALL 3/4" N.P.T.
COLD
OUTLET
HOT
OUTLET
JUNCTION
BOX
ANODE
DESCRIPTION
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
T
Y
P
E
NOMINAL
GALLON
CAPACITY
RATED
GALLON
CAPACITY
MODEL
NUMBER
FIRST HOUR
RATING
G.P.H.
RECOVERY
IN G.P.H.
90° F RISE
TANK
HEIGHT
A
HEIGHT TO
WATER CONN.
B
DIAMETER
C
APPROX.
SHIP WT.
(LBS.)
UNIFORM
ENERGY
FACTOR
(UEF)
ESTIMATED
YEARLY
ENERGY
COST3500 WATTS 4500 WATTS 3500 WATTS 4500 WATTS
Tall 30 27 T2V30-D 25 47 17 21 47-3/4 39-1/2 19-1/4 92 0.92 $293
Tall 40 36 T2V40-D 30 53 17 21 48-1/2 40-1/8 21-1/8 106 0.93 $419
EssentialelectricwaterheatersareHUDcertiedfor
Manufactured Housing and modular construction
Recovery = wattage/2.42 x temp. rise °F.
Example: 4500W
= 21 GPH
2.42 x 90°
Recovery calculations used are
based on 4500 watt elements used in
non-simultaneous operation.