Use And Care Manual

23
Diagnostic Mode
For additional unit information, you can
connect directly to the water heater via
local mode and use the EcoNet® app for
more details alarm and alert information.
To connect to the water heater via local
mode follow these steps.
1. Press the Wi-Fi step up button until the
unit beeps and the Wi-Fi LED blinks
blue.
2. From the EcoNet® app click on
Diagnostic Mode.
3. Press the connect button in the app.
4. Follow the on screen instructions.
5. Once connected you can view detailed
alarm history and network configuration
settings.
6. Once complete Close the app.
7. If your water heater was connected to
your home network previously, it will
return to that network.