User`s manual

4
Function Selection
1. Press the knob “MENU/SELECT” to show the OSD menu. Then use the “▲” and “▼” to select a function.
Press the knob “AUTO/EXIT” to close the OSD menu.
2. With the knob “▲” and “▼”, you can adjust the speaker volume on the monitor.
 When you press the knop “▼”, the speakers are mute. Press the “▼” and then the speakers are active.
 When you press the knob “▲”, the speaker volume OSD is shown. You can increase or decrease the
volume by pressing the “▲” and “▼”.
3. You can hold the knob “AUTO/EXIT” for more than 3 second to adjust the image quality automatically.
The OSD menu will close automatically after 3-10 seconds without operation and saves any changes you have
made.
Function Adjustments
1. Signal Select
When there is no OSD menu display the knob “AUTO/EXIT” can select VGA / CVBS / S-VIDEO.
2. Video
Contrast - Adjust the difference in luminance between light and dark areas of the image.
Brightness - Adjust the luminance level of the image.
Colour - Adjust the Color level of the image