User`s manual

10
5. Signal Connector Pin-outs
To connect VGA, 8514A or IBM-compatible graphics adapters, use a 15 pin mini D-type male connector.
6. Power Saving Features
When the power saving is active, the power indicator LED will be from Green Light to Amber. The power saving
feature complies with these VESA power saving modes:
Mode H. Sync. V. Sync. LED
Power
Consumption
Normal On On Green < 50 Watts
Stand-by Off On Amber < 15 Watts
Suspend On Off Amber < 15 Watts
Off Off Off Amber < 5 Watts
The monitor uses the H. Sync and V. Sync signals to determine the operation mode to enter.
The monitor power-saving feature automatically turns off H. Sync and V. Sync if there is no input from the system
for a certain period of time. To use this feature, you need a green PC that is compliant with the VESA power saving
feature or a software utility to detect system input such as keyboard or mouse.
Time Settings
Time settings are adjusted from the system unit by software. To fulfill the requirements in the NUTEK
specification 803299/94 the total time from indicated inactivity to Power Saving position A2 (VESA OFF) must
not be set more than 70 minutes. We recommend you switch off the monitor when you do not intend to use it for
a while.
15
-
pin Mini D
-
type Male Connector
Pin Assignment
1 Red Video 6 Red Ground 11 Ground
2 Green Video 7 Green Ground 12 Serial Data/I/O
3 Blue Video 8 Blue Ground 13 H. Sync
4 Ground 9 No Connection 14 V. Sync
5 No Connection 10 Sync Ground 15 Serial Clock Input