User manual

J. The Remote control unit
As an option, a Remote control unit can be connected to the Invertek. All operating
controls and displays are available on the Remote control unit, The Remote control
is supplied with a 3m long cable. It can be lengthened to 15m The Remote control
is suitable for surface mounting on the wall or on to a switch board. It is fixed with 2
screws. The Invertek can also be programmed with the Remote control. The output
currents and the charging currents are displayed on the Remote control.
J.1 The Temperature sensor
Charging voltages of lead-acid batteries can change depending on temperature.
To correct the operating voltages according to the actual temperatures, a
temperature sensor can be connected to the Invertek.
The compensation through the sensor is -3mv/℃/Cell.
-28-