Specifications

Combi Series
Interactive Inverter-Chargers
Systems and Accessories
Combi Series Inverter-Charger Features
CombiPlus SuperCombi
IntelligentGrid&GeneratorPowerManagement • •
ATSUninterruptedACTransferSwitch • •
PowerOutputRatedTo70ºc • •
2-PhaseAnd3-PhaseCapability • •
StackableForMorePower • •
PowerSupportFeature • •
DynamicPowerShifting • •
4-StageAdaptiveChargingSystem • •
SolarChargingControl(AccessoriesRequired) • •
FullRemoteSystemControl(AccessoriesRequired) • •
AutoGeneratorStartFunction • •
Aux.BatteryChargeOutput • •
ProgrammableAux.RelayOutputs(X3) • •
InteractivePureSinewaveInverter-Charger • •
DCLoadControl(AccessoriesRequired) •
ACChargerTimerAndGeneratorTimerControl •
DCChargingControl(AccessoiresRequired) •
CombiPlus® Series
Models:CP-1500-122,CP-3000-242
When the advanced features such as DC
charging control, AC charger timer, remote
generator timer, and DC load control are not
required,theCombiPlusisthebestchoice.
TheCombiPlusstillhasallthepowersupport
features, remote generator start, temperature
ratingandpoweroutputthatisexpectedwith
anInvertekCombiSeriesinverter-charger.
SuperCombi® Series
Models:SC-1500-122,SC-1500-242,
SC-3000-242
Carrying all the features, bells and whilstles you
wouldexpectfromtheagshipoftheInvertek
Combi Series. Carries all the features of the
CombiPlus,butalsohasabilitytoauto-start/
run the generator on a timer, run the battery
charger on a timer, control DC charging
sources, as well as control DC load outputs.
SolarWorx Grid Inverter - 2kW
A multi-purpose grid-inverter capable of working either directly
from solar panel input, or from a battery input that is charged by
renewable sources - making it suitable for solar, as well as wind
and hydro renewable energy. When matched with a Combi Series
interactiveinverter-charger,theSolarworxgrid-inverterallowsfor
hybrid system functionality.
SunStar Solar Charge Controller -
45A/60A
TruecommercialgradePWM(pulsewidthmodulated)solarcharge
controllers,ratedateither45Aor60A.Multipleunitscanalsobe
"stacked"uptoamaximumof10unitsforextracapacity.Canbelinked
totheCombiSeriesmodelsviatheCombiNetsystemforcentralised
control and monitoring through the Combi inverter-charger. SunStar
controllers can also be congured as a diversion load controller, which
is particularly handy for use with wind turbine generators.
SunStar MPPT Solar Charge Controller -
50A
Highgrademaximumpowerpointtracking(MPPT)solarcharge
controllerformaximumbatterychargingefciency,providingover96%
efciency. Multiple units can be stacked for increased capacity up to a
maximumof16units.WithMPPTconversiontechnology,thesolarpanel
array can have a nominal voltage higher than the battery charge voltage,
reducing the size of DC cabling required on the solar array. Also
features programmable relays outputs and a multitude of other features.
Invertek DC-DC Isolator - 140A
A fully programmable, bi-directional voltage sensitive relay that can be
used in multiple applications. Can be used for dual battery charging
and isolation, or as a controller for a DC charging source or as a DC
loadcontrollerwithlowvoltagedisconnect/reconnect.TheDC-DC
isolator can be used independently, or can be combined with the
SuperCombi to provide centralised control and monitoring of DC
chargingandDCloads.NotcompatiblewithCombiPlus.
Invertek ATS - 20A
A fully automatic AC transfer switch, which automatically selects
between a master and a slave AC power source. When used
independently, it can be used to automatically change between mains
and generator power, mains and inverter, or inverter and generator
power. When linked to a Combi Series interactive inverter-charger via
theCombiNetlink,theATScanchangetheCombi'soperatingmode
betweenMode1andMode2,toinstructtheCombiwhethertheAC
input is coming from a generator, or from mains grid power.