User manual

WLS-C Wheel Loader Scale - Printer (Optional) 35
WLS-C roll tape printer is provided with a single RJ11 pins connector including a RS232 link. Is also available
with a rugged connector cable
5.1 Specifications
Printer Method Thermal printing
Resolution 203 dpi
Printing speed > 50 mm/sec typical
Column number 24
Character set ASCII standard, International
Print format Normal, Double
Paper width 58 mm
Paper roll dimension 57.5 mm ±1 mm
Interface RS232
Baud Rate 600 to 38.400 bps
Receiver buffer 128 byte
Flash memory 32K
Graphic memory 1 logo of 348 x 85 dot
Power supply 10-30 VDC
Current consumption During printing 600mA (idle 20mA)
Dimensions 146 x 88 x 96(with holding plate)
Weight 605 gr. approx (Printer and holding bracket)
Operating Temperature Range -20 to + 70°C
Storage Temperature Range -40°C to + 80° C
Relative Humidity 10% to + 90 %
Housing Protection IP40
Printer CV1 STP6/10 cable connector
PIN Signal PIN Signal
1 +VB Power Supply A Power Supply
2 GND Signal ground B RX Input
3 RX Serial link input signal C TX Output
4TX Serial link output signal D Ground
6GND
Table 5-1. Interface Connections