User manual

WLS-C Wheel Loader Scale - Operation 31

3. To shift the asterisk on the next value to be modified by pressing the Tare/Sel button..

4. Increase or decrease the value by pressing and releasing the Partial/Minus or Total/Plus button..

5. Press and release the Print/Enter button to save the changes. The asterisk will disappear.

6. Scroll to another page of the menu or return to the operation menu by pressing and holding the Tare/Sel

button to the previous menu.

4.13 User Menu

Use the following procedure to gain access to the User menu.

1. Press and hold the Print/Enter button for 3 seconds.

2. Scroll through using the Partial/Minus or Tare/Plus buttons.

3. Press and release the Print/Enter button to modify the sub-menu selected.

The following pages will show some tables describing all the existing menus in the system where:

• The first column refers to the line of the display in which the text is written.

• The second column describes the text shown on the display.

• The third column describes the type of function implied, such as:

There are multiple functions accessible under the User menu.

Max Load 0.06

Max Load 0.00

Heading Refers to the menu’s title.

Visualize To view a set or memorized value.

Settings Refers to any value that can be modified.

Command Enables a function by pressing a command key.

Sub-menu Access Allows access to a sub-menu by pressing a command key.

Table 4-1. Definition of Types in Menu Tables

Line

Menu Text Typ e Description

1User Menu Heading

2 Tare: x.xx Visualize Last Tare value.

2 Weighing: On/Off Command Weighing enabled (On) or disabled (Off)

2 Max Load: xxx.xx Settings Current maximum load for warning lights function.

2 Machine: x Command To activate calibration 1 or 2 during operation mode.

Not available if regenerative valve present.

Table 4-2. User Settings Menu