User manual

30 WLS-C Wheel Loader Scale
4.12 Menu Flowchart
Figure 4-11. Operation Menu Flow
4.12.1 Setting New Values
Setting a new value, for example setting the Machine Setting, is achieved by using the following procedure..
1. Press and release the Print/Enter button. An asterisk will appear on line 1 above the value to be
modified..
2. Modify the value of each figure by pressing and releasing the Tare/Plus or Partial/Minus button to
change the value..
USER Menu
Max Load 0.00
*
Max Load 0.00
*
Max Load 0.06
Operating Screen
User Menu
Time Setting Sensors Check
Access by
Password
Setting Menu
Input Status On/Off Outputs Pressure Sensors
Proxy 1
Proxy 2
Buzzer
Out 4
Press. Low
Press. High
Boom Ang
Chassis Ang.