Specifications

RL-TA Series Operation Manual 3
 Calibrate the balance after installation
or relocation.
• Measurement values may contain errors,
preventing accurate measurement from being
conducted.
 Avoid applying excess force or impact to
the balance.
• Place the sample to be measured on the balance
carefully to prevent breakage or malfunction.
 Do not use the balance in a location were it
may be subjected to abrupt changes in ambient
temperature or humidity.
• Accurate measurement may be rendered
impossible.
• Use the balance in an ambient temperature range
of 5°C to 35°C and with 80% or lower relative
humidity.
 Do not leave the balance overloaded. (When it
is overloaded, (
o
-
Err
) is displayed.)
• Take down the loaded sample immediately to
prevent breakage or malfunction.
 Do not use the balance in a location where it is
subject to direct sunlight.
• The indications would be illegible.
• An internal temperature increase in the balance
may lead to inaccurate measurement.
 If the balance is to be unused for an extended
period of time, unplug the adapter.
• This conserves power and prevents deterioration.
Recommended
Calibrate
Balance
Do Not Apply
Force
Do Not Overload
Do Not Use
Do Not Use
Unplug Adapter