Specifications

RL-TS Series Operation Manual 5
Respect the following:
Be sure to calibrate the
balance after installation or
relocation.
Measurement values may
contain errors. To maintain
accurate measurement, be
sure to calibrate the balance.
Do not leave the balance
overloaded. (When it is
overloaded, o-Err is
displayed.)
To prevent breakage or
malfunction, remove the
sample placed on the
balance immediately.
If the balance is to be
unused for an extended
period of time, unplug the
AC adapter.
To conserve power and to
prevent deterioration, unplug
it.
Never disassemble or modify the batteries.
Take care to ensure you insert batteries with
the positive and negative poles correctly
inserted, and be careful about short circuits.
Such mishandling could damage the batteries, or
cause the balance to fail or ignite.
Do not put the batteries into a fire.
They may explode.
Do not mix old and new batteries, or batteries
of different types or manufacturers.
If the balance is not going to be used
for a long time, store it with the
batteries removed.
Do not use batteries that leak.
Observe the precautions printed on the
batteries or rechargeable batteries.
Dispose of batteries in accordance with
local regulations.
(battery handling)