Specifications

70 RL-TS Series Operation Manual
31B6.3 Communication Data and Commands
The RS-232C interface exchanges data with external devices as follows:
64BOutput data
The three formats of “6-digit numeric,” “7-digit numeric,” and “extended 7-digit numeric” formats are available.
Select a format with the following operation:
1
Set to the function setting mode.
(Refer to “Section 2-5: Function Setting
Basics (P.
X22X).)
Press and hold the [Function] key. After
“Func” is displayed, release the finger.
2
Press the [Function] key several times to select
“6.1.F.”
Press the [Zero/Tare] key to select a format.
1 = 6-digit numeric format
2 = 7-digit numeric format
3 = Extended 7-digit numeric format
3
Save the setting.
Press the [Target] key.
The balance goes back to normal display.