Specifications

68 RL-TS Series Operation Manual
You can set a tare range or adjust the zero-point from an external device by connecting a
contact or a transistor switch between the pin for externally setting a tare range (Pin 9) to the
pin for signal ground (Pin 5). In this case, allow at least 400 ms for connection (ON) time
(Maximum voltage when the balance is turned OFF: 15 V, sink current when it is turned ON:
20 mA.)
62BSample connection with a PC
Use the following examples as a guide to connect the balance to external devices using the cable.
- Sample connection with a PC/AT compatible machine
Reference