Specifications

30 RL-TS Series Operation Manual
7
Weigh.
The display indicates the percentage of the sample with
respect to the reference sample weight.
Pressing the [Function] key toggles the display between
percentage weight and total weight.
The minimum unit is automatically set based on the saved reference weight.
Min. Indication
Range of Reference Weight
1%
Lower weight limit ≤ Reference weight < Lower weight limit × 10
0.1%
Lower weight limit × 10 ≤ Reference weight < Lower weight limit ×
100
0.01%
Lower weight limit × 100 ≤ Reference weight
- The “L-Err” display indicates that the reference weight is below the lower weight limit where weighing
is impossible. For more information on the weight limit in percentage weighing, refer to “Appendix 4:
Specifications” (P. X94X).
Reference