Specifications

RL-TS Series Operation Manual 11
1. 3 Workings of Operation Keys
The operation keys are provided on the front of the main unit. Use these keys to operate and set the balance.
How to press the keys
In some operation keys, executed functions depend on how they are pressed.
For example, the [Target] key
saves settings when pressed shortly (short press).
When pressed and held, the key inputs settings (press and hold).
In this manual, how keys are pressed is expressed as follows:
- Press: Give a light press of the key and then release the finger.
- Press and hold: Hold the key down and release the finger after the
appropriate display is obtained.
- Continuously press and hold: Hold down the key for three seconds or
longer.
Pressing a key can sound the buzzer or change buzzer sound tones (Refer to
“Appendix 1: Function Setting List” P.
X86X).
Reference
Direction key: Use to set the
function setting, etc.
[Zero/Tare] key: Use to zero a
readout or to sel
ect a function.
[Function] key: Use to switch
measurement modes and to call
a function.
[Target] key: Use to
start settings.
[Print] key: Use for printing
or other purposes.
[On/Off] key: Use to power
on/off the main unit.