Manual

ManualsBrandsRice Lake ManualsScalesSC-3 PCA Sofware Update Procedure

February 2014 160244

MSI-3460 Challenger 3

SOFTWARE UPDATE PROCEDURE

The following instructions will assist in updating the MSI-3460 software for use with the SC-3 PCA.

Note

For more information on the MSI-3460, see the Operator’s manual (PN 152161).

Manuals can be viewed or downloaded from the Measurement Systems International website at

www.msiscales.com.

Equipment Requirements:

• PC with terminal program

• 3460 Interface Cable PN: 503230-0001 (10’)

or -0002 (5’)

Updating Process

1. Connect interface cable to P2, as shown.

Figure 1. Connecting Interface Cable

2. Power on the scale.

A RICE LAKE WEIGHING SYSTEMS COMPANY

Measurement Systems

International

Summary of content (4 pages)

PAGE 1
MSI-3460 Challenger 3 SOFTWARE UPDATE PROCEDURE The following instructions will assist in updating the MSI-3460 software for use with the SC-3 PCA. Note For more information on the MSI-3460, see the Operator’s manual (PN 152161). Manuals can be viewed or downloaded from the Measurement Systems International website at www.msiscales.com. Equipment Requirements: • PC with terminal program • 3460 Interface Cable PN: 503230-0001 (10’) or -0002 (5’) Updating Process 1.
PAGE 2
3. Open a terminal program. Figure 2. Serial Port Setup 4. Configure to the following: • Baud Rate: 38400 • Data Bits: 8 • Parity: None • Stop Bits: 1 • Flow Control: XON/XOFF 5. Type: {00FF09=0199}, then press enter. This command will access the boot-loader program within the SCALECORE. “bLOAd” displays on the MSI-3460 and the Scalecore Boot Loader menu will appear on the terminal screen MSI-3460 Display Scalecore Boot Loader Menu Figure 3.
PAGE 3
6. Type u to download and program the application code. Boot Loader program will prompt to send file. 7. Select file, then send. Wait for complete file transfer. Figure 4. Send File When complete, Boot Loader Menu will appear on terminal screen. Figure 5. Bootloader Menu 8. Verify Application Code Version, type q to query app code info. • App Code Version: 03b03 Note Contact MSI for current version. Figure 6.
PAGE 4
9. Type g to execute application code. The MSI-3460 display will return to normal weighing mode. Figure 7. Normal Weighing Mode Measurement Systems International TM A RICE LAKE WEIGHING SYSTEMS COMPANY 14240 Interurban Avenue South Suite 200 Ɣ Seattle, WA 98168-4661 Ɣ USA Phone: 206-433-0199 Ɣ Fax: 206-244-8470 www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in m.ricelake.