Troubleshooting guide

Indicator Installation and Configuration 11
12 Message style on
weight algorithm
MESS <-> WEIGH This displays the message that will
show on the indicator display. To
change the message, press the Kg-Lb
key.
WEIGH,
LIVE,
- - - - - -
To advance to the next step, press the
REWEIGH key.
13 This allows for setting
the baud rate of the
RS-232 connection
BAUd <->
Default - 9600
To change the baud rate, use the
numeric data entry (
See “Enabling
Configuration or Calibration Modes” on
page 8.)
To advance to the next step, press the
REWEIGH key.
14 Optional features
Option 1 allows the
selection of unit of
measure (UOM) in
calibration and
programming.
OP1 = 1 Hold the Kg-Lb key for browsing
through the options. Double click on
the
Kg-Lb key to change the options
value or
to advance to the next step, press the
REWEIGH key.
OP1 = Unit of measure (UOM) in
calibration and programming.
0=Kg
1=Lb
Option 2 allows the
scale to work only in
Kg.
OP2 = 0 Hold the Kg-Lb key for browsing
through the options. Double click on
the
Kg-Lb key to change the options
value or
to advance to the next step, press the
REWEIGH key.
0=Disable
1= Enable
This option works only if Option 3 is
disabled
Option 3 allows the
scale to work only in
Lb.
OP3 = 0 Hold the Kg-Lb key for browsing
through the options. Double click on
the
Kg-Lb key to change the options
value or
to advance to the next step, press the
REWEIGH key.
0=Disable
1=Enable
Option 4, the scale
must be stable to
show a Kg or Lb
weight reading. You
can enable or disable
this.
OP4 = 0 Hold the Kg-Lb key for browsing
through the options. Double click on
the
Kg-Lb key to change the options
value or
to advance to the next step, press the
REWEIGH key.
0=Disable
1=Enable
Note: won’t show lb or kg until the
scale is at a standstill.
Step Function Display Available Parameters
Table 4-2. Configuration Mode Menu