Specifications

4 RL-DBS-2 Operation Manual
3.0 Scale Setup
Figure 3-1. RL-DBS-2 Display
Use the following table to identify what each part of the display does.
Item Description Function
ON/TARE key
On Function:
One short push for On
One push for Off (approx. five seconds)
Tare Function:
One short push to Tare out the scale
This key turns the scale on and off
With weight on the scale, press this key to tare out
the scale and return it to zero.
LB/KG key
One short push
This key selects either pounds/ounces or kilograms.
RECALL key
When the scale is turned on, use one short push.
This allows the user to recall the last weighment, ie:
you can remove the baby, press the recall key and
see the baby’s weight again.
Negative or Minus indicator When the scale is on, this display shows a negative
weight reading.
zero
ZERO indicator When the scale is on, this display indicates that the
scale is stable and ready for use.
mem
Memory indicator
o
Motion indicator This is displayed when a weight reading is complete.
It is not displayed while the weight reading is being
calculated.
6-Digit LCD digital display The LCD displays the infant weight in pounds/
ounces or kilograms and shown by the LB or KG
indicator on the right side of the display.
LB/OZ indicator When the scale is on, this display indicates that the
scale is weighing in pounds/ounces
KG When the scale is on, this display indicates that the
scale is weighing in kilograms
Table 3-1. Front Panel, Showing Annunciators
ON/TARE
LB/KG
RECALL
zero
mem
ON/TARE
LB/KG
RECALL