Service manual

2
1.3 Physical Description
Overall length 20 1/2 inches
Width, main body 14 inches
Width, including handle 17 3/4 inches
Width, weighing surface 10 1/2 inches (PW 400); 13 1/2 inches (PW 500)
Length, weighing surface 11 inches
Height, nominal 3 inches
Height, maximum 3-1/8 inches
Ramp slope angle 20 degrees
Weight, complete unit 46 pounds (PW 400); 50 pounds (PW 500)
Weighing capacity 20,000 pounds / 10,000 kilograms
Accuracy As per NIST Handbook 44
±50 Lbs. (0–2,500 lbs.)
±100 Lbs. (2,501–10,000 lbs.)
±150 Lbs. (10,001–20,000 lbs.)
Approvals 20,000 lb x 50 lb models are NTEP-certified
Class IIII, CC #96-166, n
max
= 400
Operating Temperature Range 0–120°F
Storage Temperature -35–150°F
Humidity (Operating and Storage) 100%, non-condensing
Power Requirements 12 VDC
1.4 Options and Accessories
The following table shows the options and accessories available for the PW 400 and PW 500 Portable Wheel
Load Weighers. Battery chargers listed in the table show the required power source and the number of wheel
weighers that can be charged using the listed charger.
yrosseccA/noitpO
SWLR
rebmuNtraP
004WP,spmarhcaorppA09273
005WP,spmarhcaorppA19273
elbacnoitacinummoC
)tcennocretnilatot/lacolrofderiuqer(
98273
elacs-1,CAV021,regrahCyrettaB58273
elacs-2,CDV21,regrahCyrettaB68273
elacs-4,CDV21,regrahCyrettaB78273
elacs-6,CDV21,regrahCyrettaB88273