Service manual

17
13 BEARING, Link (1-3/4") 9
14 PISTON 1
15 BUSHING, Link 4
16 ASSEMBLY, Load Strip (2") 5
17 RETAINER, Load Strip Resilient (2") 5
18 LOAD STRIP, Upper (2") 5
19 LOAD STRIP, Lower (2") 9
20 NEEDLE BEARING, Load Strip 40*
21 ASSEMBLY, Base 1
22 SUBASSEMBLY, Base 1
23 BASE, Machined 1
24 LOAD STRIP, Base Side (1") 8
25 RING, Diaphragm Retainer 1
26 GASKET, Base 1
27 DIAPHRAGM 1
28 ASSEMBLY, Dial Cover 1
29 DIAL COVER, Machined 1
30 LENS, Magnifying 1
31 SWITCH PLATE ASSEMBLY 1
34 ASSEMBLY, Plumbing 1
40 ASSEMBLY, Platform (2" load strips) 1
41 SUBASSEMBLY, Platform (2" load strips) 1
42 PLATFORM, Machined (2" load strips) 1
43 DRIVE SCREW BUTTON, Platform 16*
44 WASHER, Drive Screw Button Handle 16*
45 DRIVE SCREW, Nameplate Retaining 4
46 SCREW, Diaphragm Retaining 10-24 x 5/8 Sol. hd cap 12
47 PIN, Link Retaining 4
48 SCREW, Flex Handle Retaining 1/4 - 20 x 1/2 pan hd slot 2
49 SEAL, Panel Switch 2
50 SCREW, Display Cover Retaining,Switch Panel, 6
(#4-40 x 1/2 Soc. Hd. Cap Scr., Cad. Plate)
51 SET SCREW, Platform Retaining 2
(5/16-18 x 3/8 Hex Soc. Hd. Cap Scr.,Cad. Plate)
52 SCREW, Piston Retainer 3
(5/16-18 x 7/8 Soc. Hd. Cap Scr., Cad. Plate)
53 HANDLE ASSEMBLY, Flexible 1
54 HANDLE 1
55 FLEX SPRING, Handle 2
56 INSERT, Spring Support 2
57 INSERT, Handle Support 2
58 END CAP, Handle 2
59 SCREW, Handle Support 2
(#10 - 24 x 3/4", Pan Hd., Cad. Plate)
60 PC BOARD ASSEMBLY 1
61 SCREW, PC Board Retaining; 7
Transducer Clamp; (#6-32 x 3/8 Phil Pan HD, SS)
62 NYLON SPACER for PC board (1/8 x 0.25 OD x 0.14 ID) 4
63 TRANSDUCER 1
64 BOOT, Switch 1
65 CLAMP, Transducer Retaining 1