Specifications
Table Of Contents
- 1.0 Introduction
- 2.0 Mounting Plate Installation and Setup
- 3.0 Configuration
- 3.1 Auto-Learn
- 3.2 Manual Configuration
- 3.3 Serial Communications
- 3.4 Testing the Remote Display
- 3.4.1 Display
- 3.4.2 Digital Outputs
- 3.4.3 Digital Inputs
- 3.4.4 Loop Back
- 3.5 Version
- 3.6 Demand Print Displaying
- 3.7 Serial Commands
- 3.7.1 Command Format (7-Segment):
- 3.7.2 Display Message Command Format (Matrix Display):
- 3.7.3 Set or Get the Digital I/O
- 4.0 Options
- 5.0 Appendix

36 LaserLight Remote Display Installation & Operation Manual
5.3 8- & 12-Character Display Replacement Parts
Table 5-4 lists selected replacement parts for the LaserLight Remote Display.
Reference Number Part Number Description Model Figure Number
1 84844 Enclosure, steel (1) 8-Character
display
Figure 5-7 38
7 72994 Gasket, mounting plate UV
(1)
18 76408 Cable (1) Figure 5-8 39
19 84845 Bottom plate (1)
20 84846 Component plate (1)
2 75569 Bracket, inside terminal (1) Both models
Figure 5-7 38
3 44744 Terminal block, 3-position (1)
4 15630 Locknut, 1/2 NPT black (3)
5 84850 Lens, filtering exterior (1)
8 75857 Power cord (1)
9 84760 Display board, LED (1)
10 72999 Display board, primary (1) (*2)
11 76157 Machine screw (11) (*13)
12 30625 No 8, plain nylon washer (11) (*13)
13 76158 Retaining ring (11) (*13)
14 76254 Ground wire, 10 inch (1) Figure 5-8 39
15 76246 6-position cable (1)
16 75861 Push button switch
(1)
17 45043 Ground wire, 4 inch (1)
22 16774 Fusecover, 5x20mm, blue (1)
23 72996 Power supply, 12V board (1)
24 76225 Ribbon cable, 14 inch (1) (*2)
25 85130 CPU board (1)
26 76224 Ribbon cable, 8 inch (1)
27 76176 Clear extruded rod (1)
28 71349 Filter, breathing .25 in dia. (1)
29 58983 Cable grip, SL-7 with nut (2)
30 22262 Seal, liquid tight 1/2 NPT (1)
31 15895 Cover, switch SRVR NEMA 4X (1)
33 40672 Ground wire, 9 inch (1) Figure 5-7 38
34 14626 Kep nut, 8-32 NC HEX (6)
35 15134 Lock washer, number
8 type A (6)
37 15628 Cord grip, 1/2 NPT black (3)
38 15665 Reducing gland, 1/2 NPT (3)
39 19538 Post only, slotted black (1)
40 75860 Power supply cable (1)
41 14833 Screw, MACH, 4-40 NC x 1/2 (2)
42 45302
Standoff, 8-32 NC (2)
* Identifies quantity for the 12-character display
75936 Installation manual (1)
Table 5-4. 8- & 12-Digit Replacement Parts