Specifications
Table Of Contents
- 1.0 Introduction
- 2.0 Mounting Plate Installation and Setup
- 3.0 Configuration
- 3.1 Auto-Learn
- 3.2 Manual Configuration
- 3.3 Serial Communications
- 3.4 Testing the Remote Display
- 3.4.1 Display
- 3.4.2 Digital Outputs
- 3.4.3 Digital Inputs
- 3.4.4 Loop Back
- 3.5 Version
- 3.6 Demand Print Displaying
- 3.7 Serial Commands
- 3.7.1 Command Format (7-Segment):
- 3.7.2 Display Message Command Format (Matrix Display):
- 3.7.3 Set or Get the Digital I/O
- 4.0 Options
- 5.0 Appendix
30 LaserLight Remote Display Installation & Operation Manual
--- 76254 Ground wire, 10 inch (1) Both models Figure 5-4 34
--- 75857 Power cord (1)
--- 76408 AC power supply cable (1)
8 15628 Cord grip, 1/2 NPT black (3)
41 15630 Locknut, 1/2 NPT black (3)
--- 75569 Bracket, inside terminal (1)
--- 45302 Standoff, 8-32 NC (2)
--- 44744 Terminal block, 3-position (1)
--- 14833 Screw, MACH, 4-40 NC x 1/2 (2)
--- 14626 Kep nut, 8-32 NC HEX (6)
--- 15134 Lock washer, number 8 type A (6)
19 58983 Cable grip, SL-7 with nut (2) Figure 5-3 33
20 4125 Nylon washer (2)
21 76176 Clear extruded rod (1)
22 75861 Push button switch (1)
23 15895 Cover, switch SRVR NEMA 4X (1)
24 22262 Seal, liquid tight 1/2 NPT (1)
25 71349 Filter, breathing .25 in dia. (1)
27 76158 Retaining ring (11)
28 30625 No. 8, plain nylon washer (11)
29 76157 Machine screw (11)
33 76156 Post, PCB support (4)
36 15665 Reducing gland, 1/2 NPT (3) Figure 5-2 32
37 76224 Ribbon cable, 8 inch (2)
38 72996 Power supply, 12V board (1)
39 45043 Ground wire, 4 inch (1)
40 75860 Power supply cable (1)
41 19538 Post only, slotted black (1)
42 76514 6-position screw terminal (1)
43 76513 4-position screw terminal (1)
44 72997 CPU board (1)
45 76226 Ribbon cable, 1 inch (1)
75936
Installation manual (1)
Reference Number Part Number Description Model Figure Number
Table 5-2. Selected Replacement Parts