Specifications
Table Of Contents
- 1.0 Introduction
- 2.0 Mounting Plate Installation and Setup
- 3.0 Configuration
- 3.1 Auto-Learn
- 3.2 Manual Configuration
- 3.3 Serial Communications
- 3.4 Testing the Remote Display
- 3.4.1 Display
- 3.4.2 Digital Outputs
- 3.4.3 Digital Inputs
- 3.4.4 Loop Back
- 3.5 Version
- 3.6 Demand Print Displaying
- 3.7 Serial Commands
- 3.7.1 Command Format (7-Segment):
- 3.7.2 Display Message Command Format (Matrix Display):
- 3.7.3 Set or Get the Digital I/O
- 4.0 Options
- 5.0 Appendix
Options 25
4.4 Pole Mount Kit
The LaserLight remote display can easily be mounted on a pole or steel I-beam using the optional pole mounting
kit (PN 75856 - 4"), (PN 77775 - 6"), (PN 85343 - 8-character), (PN 85344 - 12-character). Use the following
steps to install the pole mount option.
1. Use the enclosed 3/8" cap screws, w
ashers ad lock nuts from the parts kit to attach the clinching pole
brackets to the pole mounting weldment.
NOTE: The 6" LaserLight remote display uses four brackets (PN 76999) and the 4", 8- & 12-character display uses two.
2. Use the enclosed 3/8-16NC bolt (PN 14747), to attach the clinching pole brackets together using washers
and lock nuts. Tighten as necessary.
3. Align the back of the
LaserLight remote display to the pole mount weldment so that the holes line up.
4. Use enclosed 1/4" cap screws, washers and nuts to attach the remote di
splay to the mounting weldment.
Reference
Number
Model Description Figure
4" 6"
See Figure 4-3
on page 26
2 77000 76998 Weldment, Pole Mounting (1)
8 14635 Nut, lock 1/4-20NC HEX (4)
3 14747 Bolt, 3/8-16NCx2-3/4 HEX (4" model - 1) (6" model - 2)
10 14955 Screw, cap 1/4-20NCx1/2 (4)
7 15019 Screw, cap 3/8-16NCx1 HEX (4" model - 2) (6" model - 4)
9 15145 Washer, plain 3/8 type A (8)
4 21938 Washer, plain type A (4" model - 4) (6" model - 8)
5 22072 Nut, lock 3/8-16NC HEX (4" model - 3) (6" model - 6)
6 76999 Bracket, clinching pole (4" model -2) (6" model - 4)
11 77001 Screw, mach 3/8-16NC (4" model - 3) (6" model - 6)
Table 4-1. Parts Kit Contents (4" and 6" Models)
Reference
Number
Model Description
8-Character 12-Character
See Figure 4-3
on page 26
2 85034 85035 Weldment, Pole Mounting (1)
8 14635 Nut, lock 1/4-20NC HEX (4)
3 14747 Bolt, 3/8-16NCx2-3/4 HEX (1)
10 14955 Screw, cap 1/4-20NCx1/2 (4)
7 15019 Screw, cap 3/8-16NCx1 HEX (2)
9 15145 Washer, plain 3/8 type A (8)
4 21938 Washer, plain type A (4)
5 22072 Nut, lock 3/8-16NC HEX (3)
6 76999 Bracket, clinching pole (2)
11 77001 Screw, mach 3/8-16NC (3)
Table 4-2. Parts Kit Contents (8- and 12-Character Models)