Specifications

Configuration 13
CONFIG Menu
7-Segment Display
Parameter
8-Character Matrix
Display
12-Character matrix
Display
Choices Description
Level 2 Submenus
TIMDAT TIMEDATE TIME/DATE Enabled
Format
Set
Date
To enable time and date
Displays USA or ISO time format
Sets hours/minutes and month/day/year
Can disable date
TEMP TEMP TEMPERATURE F
C
Select Fahrenheit or Celsius
TEMPADJ TEMPADJ DEGREE ADJUST + 5%
- 5%
+/- 5 degrees display. Can add or subtract up to +/- 5
degr
ees of both Fahrenheit or Celsius
BRIGHT BRIGHT BRIGHTNESS Day
Night
Selects the brightness during day or nightime hours
SUPP O SUPP O SUPPRESS 0 On
Off
Select On to enable the suppression of leading zeros
in a
weight.
MIRROR MIRROR MIRROR On
Off
Select On to display LED readout in reverse. The
men
u is viewed normally.
STDSTL STD STL STAND STILL On
Off
Select On to enable display updated
weight only when
the scale is not in motion.
ADDRES ADDRESS ADDRESS 0 t
hrough
31
Assign a command address by selecting a number
between 0-31.
MSG TM MSG TIME MESSAGE TIME 5, 15, 30
sec.,
1, 5
minutes
Select amount of time a message stays on the remote
display. Time can vary from 5 seconds to 5 minutes. If
no serial command is used, then this parameter is not
used. (7-segment DM command only)
D TEST DSP TEST DISPLAY TEST On
Off
Set this parameter On to enable a countdown display
te
st on start up.
RESET RESET RESET CONFIG Resets the remote display
to default parameters
LEARN EN LEARN EN LEARN EN On
Off
Enable allows weight learn operation.
With Learn off,
the unit operates for demand messages.
Table 3-2. Configuration Menu Summary - Level 2